Hubble S-100 1.2kWh 12V 100Ah Lithium Ion Battery

• Internal Battery Management System
• BMS protects internal cells and ensures smooth operation
• Excellent high temperature performance
• High Cycle Life and Service Life
• Can be configured in 12V, 24V, 36V or 48V in series (24V / 48V Hubble Battery Balancer to be added)
• 1C High Performance Lithium battery
• High energy density and conversion efficiency
• Can parallel up to 15 batteries in 12V configuration
• Compatible with most UPS & Inverters using AGM/VRLA charge setting – IMPORTANT: Please note that Hubble requires certain settings to be done on your Inverter such as Float Charge Voltage / Bulk Charge / Low DC cut off. Please make sure that your inverter is compatible before purchasing the battery
• Low self discharge
• Easy drop in replacement for old lead acid battery installs
• Perfect replacement Lithium solution for upgrading your lead acid installation (please refer to warranty condition no. 7 )
• Built in protection for over-charge, over-discharge & over-temperature
• Warranty: 1 Years / 2000 Cycles

Warranty Conditions:

1.The Battery is intended to be used for standby backup or daily cycling in UPS and Inverter systems including solar Inverters. Other uses for the Battery will void the warranty.
2. A fuse or suitable DC breaker must be installed between the inverter/charge/ups and the Battery or battery bank. Failure to install a suitable rated fuse or DC breaker can damage the Battery and will void the warranty.
3. The Battery is intended to be used indoors only. Outdoor use will render the warranty void.
4. The Battery must not have been contaminated with any foreign or corrosive matter. Contamination will void the warranty.
5. The warranty does not cover damage due to neglect or abuse such as improper installation, freezing, fire, flooding, or any acts of nature.
6. The warranty does not cover surges or spikes from the inverter or charging device that could damage the Battery.
7. If the Battery was installed incorrectly and not according to the manual with correct settings it could result in damage. Incorrect installation
and setup will void the warranty.
8. Incorrect sizing of the inverter, charger, or solar system can damage the Battery and void the warranty.
9. Batteries must be provided with a refresh charge every 5-6 months, while in storage, prior to final installation.
10. Warranty will be void if the firmware or BMS on the device has been deliberately tampered with or to try and reset cycle values or any data for
warranty evaluation purposes.
11. If it is found that the Battery is being overloaded through large current draws above the intended rating of the Battery, which is outside the
intended or indicated specification parameters, the warranty will be void.